How to Measure & Calculate Cubic Yards Step by Step

Learn the easy math behind cubic yard calculations so you can measure any yard or building site with confidence.

Simple Formulas for Square, Round & Triangle Areas

Measuring your yard does not have to be hard. All you need is a tape measure and a few minutes. Follow these four easy steps to find out how many cubic yards of soil, mulch, or stone your job needs.

Step 1: Measure Length and Width in Feet

Walk the edges of your bed, lawn, or patio. Measure the length in feet and the width in feet. Multiply length by width to get your total area in square feet.

Step 2: Pick Your Depth in Inches

Decide how thick your new layer will be. Mulch beds usually need 3 inches. Concrete patios need 4 inches. New garden beds need 6 to 12 inches of soil. Divide your inches by 12 to turn depth into feet.

Step 3: Divide Cubic Feet by 27

Multiply your square feet by your depth in feet to get cubic feet. Since 1 cubic yard holds 27 cubic feet, divide your cubic feet by 27. Or use the shortcut rule: (Length in ft × Width in ft × Depth in inches) ÷ 324 = Cubic Yards.

Step 4: Add a 10% Safety Buffer

Dirt and mulch pack down when you walk on them or water them. Ground also has small dips that hold extra material. Adding 10% extra ensures you have enough to finish the job cleanly.

Try the Cubic Yard Calculator Now

Test your measurements below to see instant results.

Total Material Needed (With Buffer)
2.72
Cubic Yards
Cubic Feet 73.33 ft³ Volume in ft³
Cubic Meters 2.08 m³ Metric volume
Store Bags (2 ft³) 37 bags 2 cu ft bag count
Total Weight 0.95 US Tons Estimated load weight
Truck Loads 1 Dump Truck Delivery estimate
Estimated Cost Enter price above Total material price